MATERIALS / SLS
X92A TPU
Flexible SLS TPU
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A flexible powder-bed material with a listed Shore A hardness of 92. It is positioned for lightweight, resilient components that recover after deformation.
Selection considerations
Confirm the required compression, recovery and geometry.
Discuss this material →| Printing process | SLS |
|---|---|
| Supplier-listed dimensional accuracy | ±0.3-0.5mm |
| Listed colours | Black/White |
| Tensile strength | 15-20MPa |
| Tensile modulus | Not specified |
| Elongation at break | 500% |
| Flexural strength | No failure reported |
| Flexural modulus | No failure reported |
| Heat deflection temperature | 90°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
