MATERIALS / SLS
P9630GF · supplier-listed BASF
Glass-filled PA6
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A PA6-based SLS material listed with glass-fibre reinforcement. It is positioned for high-strength, impact-resistant and wear-resistant engineering components.
Selection considerations
Confirm the manufacturer's grade and any thermal or electrical qualification.
Discuss this material →| Printing process | SLS |
|---|---|
| Supplier-listed dimensional accuracy | ±0.2mm |
| Listed colours | Dark grey |
| Tensile strength | 72MPa |
| Tensile modulus | 6481MPa |
| Elongation at break | 1.3% |
| Flexural strength | 127MPa |
| Flexural modulus | 6174MPa |
| Heat deflection temperature | 218°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
