MATERIALS / SLS
P8230GF
Glass-filled nylon
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A glass-fibre-filled SLS nylon designed for increased rigidity and dimensional stability. It is a candidate when thermal deformation and wear performance are important selection criteria.
Selection considerations
Confirm fibre content and grade-specific test data.
Discuss this material →| Printing process | SLS |
|---|---|
| Supplier-listed dimensional accuracy | ±0.15mm |
| Listed colours | Off-white |
| Tensile strength | 45MPa |
| Tensile modulus | 2600MPa |
| Elongation at break | 6.7% |
| Flexural strength | 60MPa |
| Flexural modulus | 2100MPa |
| Heat deflection temperature | 151°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
