MATERIALS / SLS
P8120
SLS polymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
An SLS material for functional parts that need a balance of mechanical strength, impact performance and wear resistance. The supplier also highlights low density for lightweight component design.
Selection considerations
Confirm the exact grade and surface requirements.
Discuss this material →| Printing process | SLS |
|---|---|
| Supplier-listed dimensional accuracy | ±0.15mm |
| Listed colours | White/Black |
| Tensile strength | 45MPa |
| Tensile modulus | 1600MPa |
| Elongation at break | 38% |
| Flexural strength | 46.1MPa |
| Flexural modulus | 1297MPa |
| Heat deflection temperature | 84.5°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
