MATERIALS / SLS
3200P · supplier-listed BASF
SLS polymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
An SLS material described as lightweight and rigid, with chemical resistance and dimensional stability. Its natural printed surface has a slightly textured appearance.
Selection considerations
Confirm the underlying polymer grade and final surface requirement.
Discuss this material →| Printing process | SLS |
|---|---|
| Supplier-listed dimensional accuracy | ±0.2mm |
| Listed colours | White |
| Tensile strength | 32MPa |
| Tensile modulus | 2000MPa |
| Elongation at break | 30% |
| Flexural strength | 28.7MPa |
| Flexural modulus | 2100MPa |
| Heat deflection temperature | 100°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
