MATERIALS / SLA
PerFORM260
High-temperature photopolymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A rigid photopolymer positioned for tooling and models that require thermal performance. The supplier references wind-tunnel models and rapid tooling among its possible applications.
Selection considerations
The listed temperature requires confirmation of formulation, curing and test conditions.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.15mm |
| Listed colours | White |
| Tensile strength | 80MPa |
| Tensile modulus | 9800MPa |
| Elongation at break | 1.2% |
| Flexural strength | 9030MPa |
| Flexural modulus | 20J/m |
| Heat deflection temperature | 268°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
