MATERIALS / SLA
M2300 Brown Resin
Photopolymer resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A brown SLA resin with a wood-like colour and fine-detail capability. The supplier describes an appearance that helps reduce the visibility of layer lines in presentation models.
Selection considerations
Confirm the desired colour and cosmetic finish.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.15mm |
| Listed colours | Brown |
| Tensile strength | 50Mpa |
| Tensile modulus | 2150MPa |
| Elongation at break | 12% |
| Flexural strength | 50-65Mpa |
| Flexural modulus | 2450MPa |
| Heat deflection temperature | 58-65°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
