MATERIALS / SLA
EzCast
Castable photopolymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
An SLA resin for precision casting patterns, including complex or thin-walled geometries. The supplier highlights low expansion, clean burnout and a smooth surface that can be polished.
Selection considerations
Confirm the casting workflow and burnout schedule.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.2mm |
| Listed colours | Clear |
| Tensile strength | 45.0±5.0 MPa |
| Tensile modulus | 2300±500 MPa |
| Elongation at break | 7.5±3.0 % |
| Flexural strength | 60.0±5.0 MPa |
| Flexural modulus | 2000±500 MPa |
| Heat deflection temperature | 50.0±3.0 °C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
