MATERIALS / SLA
Element Castable Resin
Castable photopolymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
An SLA casting-pattern material for complex geometries. It is intended to support pattern production for casting, where clean burnout and compatibility with the casting workflow are important.
Selection considerations
Review the burnout cycle and casting process before selection.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.2mm |
| Listed colours | Clear |
| Tensile strength | 42MPa |
| Tensile modulus | 2656MPa |
| Elongation at break | Not specified |
| Flexural strength | Not specified |
| Flexural modulus | Not specified |
| Heat deflection temperature | 60°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
