MATERIALS / SLA
8001C Clear Resin
Clear photopolymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A clear SLA resin for transparent models and light-transmitting components. The final clarity depends on the part geometry and finishing route; sanding and polishing may be required.
Selection considerations
Agree the optical appearance and post-processing scope.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.2mm |
| Listed colours | Clear, MulticolourClear, Translucent |
| Tensile strength | 48MPa |
| Tensile modulus | Not specified |
| Elongation at break | 12% |
| Flexural strength | 2100MPa |
| Flexural modulus | 28J/m |
| Heat deflection temperature | 50-60°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
