MATERIALS / SLA
6001B Black Resin
Photopolymer resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A black SLA resin with a matte appearance and strong visual coverage. It is suited to appearance models and components where a dark, opaque surface is required.
Selection considerations
Confirm the surface finish and light-blocking requirements.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.15mm |
| Listed colours | Black |
| Tensile strength | 61MPa |
| Tensile modulus | 3000MPa |
| Elongation at break | 7% |
| Flexural strength | 90MPa |
| Flexural modulus | 2300MPa |
| Heat deflection temperature | 55°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
