MATERIALS / FDM
PPS-CF
Fibre-reinforced PPS
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
Carbon-fibre reinforcement increases the rigidity and dimensional stability of PPS. It is intended for engineering components where temperature and stiffness are central to material selection.
Selection considerations
Confirm the grade and long-term service conditions.
Discuss this material →| Printing process | FDM |
|---|---|
| Supplier-listed dimensional accuracy | ±0.3mm |
| Listed colours | Black |
| Tensile strength | 97.01MPa |
| Tensile modulus | 9.32GPa |
| Elongation at break | Not specified |
| Flexural strength | 137.17MPa |
| Flexural modulus | 6.87GPa |
| Heat deflection temperature | 264°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
