MATERIALS / DLP
ToughPP 1500
PP-like DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A tough photopolymer intended to resemble polypropylene-like mechanical behaviour. It balances rigidity with compliance for prototype parts that bend and recover under repeated loading.
Selection considerations
PP-like does not mean the material is polypropylene.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Grey |
| Tensile strength | 33MPa |
| Tensile modulus | 1.5GPa |
| Elongation at break | 51% |
| Flexural strength | 39MPa |
| Flexural modulus | 1.4GPa |
| Heat deflection temperature | 52°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
