MATERIALS / DLP
Rigid W5
Rigid DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A bright white photopolymer for stiff, detailed models. Its matte appearance and smooth surface suit visual prototypes and components where fine features are important.
Selection considerations
Confirm cosmetic surfaces and any finishing requirements.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | White |
| Tensile strength | 62MPa |
| Tensile modulus | 2675MPa |
| Elongation at break | 13% |
| Flexural strength | 103MPa |
| Flexural modulus | 2750MPa |
| Heat deflection temperature | 71°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
