MATERIALS / DLP
ESDGuard G60
ESD photopolymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A resin intended for static-dissipative components used in manufacturing environments. It is a candidate for fixtures or handling parts where electrostatic behaviour is part of the specification.
Selection considerations
Confirm the required resistance range and verification method.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Black, Grey |
| Tensile strength | 44.2MPa |
| Tensile modulus | 1.937GPa |
| Elongation at break | 12% |
| Flexural strength | 61MPa |
| Flexural modulus | 1.841GPa |
| Heat deflection temperature | 62.2°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
