MATERIALS / DLP
Clear Cast Resin
Castable DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A photopolymer for investment-casting patterns. The supplier highlights low thermal expansion and low ash content to support casting preparation for detailed geometries.
Selection considerations
Review the burnout cycle and casting compatibility.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Clear or translucent |
| Tensile strength | 65MPa |
| Tensile modulus | 2.8GPa |
| Elongation at break | 6% |
| Flexural strength | Not specified |
| Flexural modulus | 2.2GPa |
| Heat deflection temperature | 73°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
