MATERIALS / DLP
Flame V0 Resin
Flame-retardant photopolymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A resin intended for rigid functional components with flame-performance requirements. The supplier highlights self-extinguishing behaviour and heat resistance for industrial applications.
Selection considerations
Verify the exact flame classification and relevant test documentation.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Light grey |
| Tensile strength | 41MPa |
| Tensile modulus | 3.1GPa |
| Elongation at break | 7.1% |
| Flexural strength | 75MPa |
| Flexural modulus | 2.7GPa |
| Heat deflection temperature | 111°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
