MATERIALS / DLP
HT238
High-temperature DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A photopolymer for finely detailed prototypes requiring thermal performance. The supplier states an HDT of 238°C at 0.45 MPa; this is a test value rather than a general continuous-use temperature.
Selection considerations
Confirm cure conditions, applied load and thermal exposure.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Translucent light brown |
| Tensile strength | 49MPa |
| Tensile modulus | 2.8GPa |
| Elongation at break | 2.3% |
| Flexural strength | 97MPa |
| Flexural modulus | 2.8GPa |
| Heat deflection temperature | 238°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
