MATERIALS / DLP
Flexible 80A
Flexible DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
An elastomeric photopolymer with a listed Shore A hardness of 80. It is a candidate for prototype cushioning, damping and compliant features that undergo bending or compression.
Selection considerations
Confirm geometry, deformation and expected loading cycles.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Clear |
| Tensile strength | 8.9MPa |
| Tensile modulus | Not specified |
| Elongation at break | 120% |
| Flexural strength | Not specified |
| Flexural modulus | Not specified |
| Heat deflection temperature | Not specified |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
