MATERIALS / DLP
RigidPeek 4000
Filled DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A glass-filled photopolymer intended for rigid engineering models with a smooth, matte surface. The supplier compares its stiffness and precision with high-performance thermoplastics.
Selection considerations
This is a PEEK-like resin, not PEEK thermoplastic.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | White |
| Tensile strength | 69MPa |
| Tensile modulus | 4.1GPa |
| Elongation at break | 5.3% |
| Flexural strength | 105MPa |
| Flexural modulus | 3.4GPa |
| Heat deflection temperature | 77°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
