MATERIALS / DLP
RigidNylon 10K
Rigid DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A stiff photopolymer intended to emulate the rigidity of reinforced thermoplastics. It has a smooth, matte surface and is positioned for engineering models requiring dimensional stability.
Selection considerations
Nylon-like behaviour does not identify it as nylon thermoplastic.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | White |
| Tensile strength | 53MPa |
| Tensile modulus | 10GPa |
| Elongation at break | 1% |
| Flexural strength | 103MPa |
| Flexural modulus | 10GPa |
| Heat deflection temperature | 218°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
