MATERIALS / DLP
ToughABS 2000
ABS-like DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A photopolymer intended for strong, rigid functional prototypes with ABS-like behaviour. It is a candidate when a model should resist bending during handling or evaluation.
Selection considerations
Confirm service duration and the required loading conditions.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Grey |
| Tensile strength | 46MPa |
| Tensile modulus | 2.2GPa |
| Elongation at break | 48% |
| Flexural strength | 65MPa |
| Flexural modulus | 1.9GPa |
| Heat deflection temperature | 63°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
