MATERIALS / DLP
Rigid G5
Rigid DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A grey general-purpose photopolymer for stiff, detailed models. Its smooth, matte appearance supports visual evaluation of shape and surface features.
Selection considerations
Confirm functional loads before using an appearance-oriented resin.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Grey |
| Tensile strength | 62MPa |
| Tensile modulus | 2675MPa |
| Elongation at break | 13% |
| Flexural strength | 103MPa |
| Flexural modulus | 2750MPa |
| Heat deflection temperature | 71°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
