MATERIALS / DLP
Rigid B5
Rigid DLP resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A deep-black photopolymer for rigid models with fine details. The matte surface and opaque colour suit appearance prototypes that need a dark, consistent presentation.
Selection considerations
Confirm the required finish and dimensional needs.
Discuss this material →| Printing process | DLP |
|---|---|
| Supplier-listed dimensional accuracy | ±0.05mm |
| Listed colours | Black |
| Tensile strength | 61MPa |
| Tensile modulus | 2700MPa |
| Elongation at break | 10% |
| Flexural strength | 103MPa |
| Flexural modulus | 2750MPa |
| Heat deflection temperature | 69°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
