MATERIALS / FDM
PEEK-CF
Fibre-reinforced PEEK
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
Carbon-fibre-filled PEEK offers a more rigid alternative to unfilled PEEK, with wear and thermal performance suited to demanding engineering evaluation. It is a candidate for highly loaded components.
Selection considerations
Confirm fibre content, orientation and grade-specific data.
Discuss this material →| Printing process | FDM |
|---|---|
| Supplier-listed dimensional accuracy | ±0.3mm |
| Listed colours | Black |
| Tensile strength | 285MPa |
| Tensile modulus | 35 GPa |
| Elongation at break | 1.5% |
| Flexural strength | 425MPa |
| Flexural modulus | 30GPa |
| Heat deflection temperature | 341°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
