MATERIALS / SLA
8228 Tough Resin
ABS-like photopolymer
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
An ABS-like SLA resin selected for more compliant, impact-tolerant prototypes than a standard white modelling resin. The supplier highlights toughness and resistance to repeated loading.
Selection considerations
ABS-like describes behaviour; this is a photopolymer, not ABS thermoplastic.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.15mm |
| Listed colours | Yellow-green |
| Tensile strength | 51.21MPa |
| Tensile modulus | 2136MPa |
| Elongation at break | 16% |
| Flexural strength | 93.5MPa |
| Flexural modulus | 2355MPa |
| Heat deflection temperature | 58°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
