MATERIALS / SLA
8111X White Resin
Photopolymer resin
← Back to material selection
MATERIAL OVERVIEW
Properties to guide your selection.
A white SLA resin for finely detailed models with a smooth surface. Its appearance and colour stability make it useful for visual prototypes where detail reproduction is a priority.
Selection considerations
Confirm cosmetic areas and any painting requirements.
Discuss this material →| Printing process | SLA |
|---|---|
| Supplier-listed dimensional accuracy | ±0.15mm |
| Listed colours | White |
| Tensile strength | 53.7MPa |
| Tensile modulus | 3160MPa |
| Elongation at break | 5.1% |
| Flexural strength | 78.6MPa |
| Flexural modulus | 2450MPa |
| Heat deflection temperature | 59°C |
Heat deflection temperature is a test result, not a continuous-use temperature. Dimensional requirements are reviewed against the drawing.
